Loading...

Truck fuel level after a tank or sensor replacement

Verify what the Ruptela Eco5 Lite reports after a fuel tank or sensor replacement and how to reconcile the reading in Plaspy with refuelling records.

After replacing a truck's fuel tank or sensor, establish what the new installation measures before matching its fuel level to refuelling records. A Ruptela Eco5 Lite can transmit data from a compatible, calibrated sensor. You can review the data received in Plaspy when the setup reports it. To decide whether a change warrants investigation, identify the tank, the unit of measurement and when the new measurement reference took effect.

Imagine maintenance replacing a tank and returning the truck with the same name on the map. The next day, an accounts employee compares the fuel level with a receipt from the filling station. The line appears to shift around the time of the workshop visit. The difference may reflect work on the fuel system, a changed relationship between sensor and tank, or something still to be checked. This illustrative case shows how to decide which part of the record you can use to reconcile refuelling.

Identify the tank represented by the reading

A fuel percentage needs a physical reference. A truck may have a single tank for the engine or an arrangement with more than one tank. Some installations report a reading for each tank. Others provide data for part of the installation. Ask the installer which component the sensor measures and how its reading will appear in the platform. A field called “fuel” identifies the type of information. The team also needs to know which tank it represents.

That difference changes the reconciliation. If the receipt is for a fill in a different tank from the one being monitored, the receipt and the reading may both be accurate. If two fills were put on one receipt, the total may be split between tanks. Before investigating a discrepancy, establish which tank received the fuel and what the fleet recorded. When the supplier confirms that a particular tank is being measured, keep that reference with every comparison you make.

Ruptela lists interfaces for compatible accessories on the Eco5 Lite. That gives you a starting point to discuss the sensor and how it will transmit a reading. The tracker and fuel sensor are separate items. In the Colombian kit offer, a fuel sensor is quoted separately. Ask the installer to confirm the sensor model, compatibility with the truck and tank, the data Plaspy will receive, and which installation and calibration work the quote covers.

What calibration changes and what the account records

Calibration relates the sensor signal to a reference for its tank. The relationship depends on the tank's shape and how the measurement is made. A rise in liquid height in a narrow section can correspond to a different amount of fuel from the same rise in a wide section. A change in tank, sensor or measurement position warrants checking that relationship with the installer. The person reading the report needs to know when the new measurement can be used and which unit it is in.

The sensor maker and the installer determine the calibration method. Omnicomm's calibration documentation, for example, relates its sensor readings and refuelling records to the type of tank. That helps explain why the measurement needs a reference for the specific installation. Procedures for one product apply to that product. Confirm the method for the sensor that is actually installed and retain the evidence of the check the technician made.

The Plaspy sensors documentation distinguishes the tank capacity used in calculations and a distance-based estimate of fuel consumption where applicable. Those settings serve different purposes from calibrating the sensor. If the workshop changes the capacity recorded in the account, the operations team also needs to retain the source of the reading and how it was verified. A fuel estimate can help with a trip review. To reconcile a fill with an observed level, establish that you are using the sensor reading and the reference that applied at the time.

Plaspy's detailed device information can show fuel level when the device provides it. Identify the vehicle and report time as well as the value. An earlier reading can still be useful for documenting the previous installation. Keep it with that period. When the measurement reference changes, record the date and reason so a later review can identify observations that came from different setups.

Check the new reference against an identifiable fill

Arrange a documented refuelling event with the maintenance team and the installer after the work. Whoever reconciles the fill needs to identify the unit, tank, time and volume on the receipt. In the account, find the readings that relate to the fill. Keep each value and its unit alongside the report time. If there were material differences in vehicle position, timing or other conditions between observations, retain those details. The point is to compare observations with enough context to understand the change.

Consider an illustrative calculation. The receipt shows that 60 litres were added to the tank under review. Assume the installation has been validated to report in litres and shows 180 litres before refuelling and 238 litres afterward. Subtract 180 from 238 to get a reported increase of 58 litres. The difference between the receipt and the reported increase is 2 litres. These figures show how to compare the readings. They provide neither an acceptable error tolerance nor a result measured with the Eco5 Lite.

Decide how to investigate that difference under the method agreed with the installer. The two readings may be separated by some driving between a measurement and the fill. The way a truck is parked can also change the height of the fuel at a measurement point. If the comparison was made under different conditions from the calibration check, retain that context and consult the technician. A close result at one fill adds evidence for that exercise. For other levels, follow the acceptance criteria agreed with the installer.

The available reading may be a percentage. An increase from 30% to 45% is 15 percentage points. That is useful as a change in the level reading. Relating it to litres requires a conversion validated for the particular installation and tank. While that check is open, record the level change and the receipt volume as separate observations. The technician can then verify whether the installation delivers the comparison the accounts team needs.

Keep the unit of measurement beside each record when reviewing several fills. A difference in litres and a change in percentage points answer different questions. You can keep both in the review and reserve the total for volume differences that share a verified reference. That gives the accounts team a way to review both observations while preserving the measurement each one represents.

Investigate a discrepancy after workshop work

If the reading changes as the truck comes back from the workshop, start with the work record. It may show whether the tank was replaced, whether the existing sensor was retained or whether fuel was transferred during the work. Check when data from the new reference began arriving and whether an earlier reading stayed visible during a period without updates. That helps you distinguish a change within one installation from values that came from different setups.

Then compare the operating records. The receipt shows what was paid for and records a volume and time. The data in Plaspy reflects what the device reported. If you have a pump record by vehicle or a workshop note, use it to establish which tank was involved. If a change has no matching receipt, keep the observations and ask the responsible team what happened in that time window. A single reading gives you a reason to look. Establishing the cause requires additional operating evidence.

The record may also show a gap during the work. Keep that period visible. Using the last old reading and the first new reading as the ends of the same measurement interval combines a possible change in the amount of fuel with a change in how it was measured. For internal reviews, identify the first reading you can attribute to the new setup and show which periods can be compared.

If the installation reports values but the changes do not agree with documented checks, ask the installer to review the difference before using the result for fuel decisions. Maintenance can establish what changed, who checked the calibration and which condition needs testing again. Accounts can retain the receipts independently. The check stays open without turning the discrepancy into a conclusion about loss, consumption or savings.

Give the next person enough information to reconcile the reading

A useful handover identifies the unit and tank being measured. It states what changed and when the new reference began. It describes the value and unit Plaspy receives, with the evidence from the test. It flags the earlier or incomplete periods that need separate review. The record can be short if it points people to the workshop notes and the fill used to check the installation.

Suppose another employee takes over the truck's account. If the screen shows only a number, they may compare it with today's receipt without noticing that the installation changed. With a reference to the acceptance record and the scope of the reading, they can decide whether the observations are comparable. They also know whom to ask if the next receipt leaves the tank unidentified or the report time falls far from the refuelling event.

If the fleet uses both a maintenance system and an expense record, agree where the change of reference will be visible. The purchase record can preserve the amount paid for fuel. The maintenance record can preserve which installation was checked. A short note next to the reconciliation connects them without asking the accounts team to interpret a calibration procedure. It also gives the installer enough context to understand why a particular reading was flagged.

A useful question for the installer is “Which reading should we stop comparing if this sensor or tank changes again?” The answer helps staff identify when a configuration change affects their work even though the vehicle still appears under the same name. In a fleet with several tanks, a change can affect one reference while the other remains valid. A precise record makes it possible to keep using the evidence that still applies.

Decide which uses the new reading can support

An installation can be useful for identifying a level change before it has been checked for reconciliation in litres. If the installer has confirmed the sensor response during a fill and the volume comparison is still open, communicate both results. Dispatch can review a change and ask for more information. Accounts keeps the volume check open. A status for each use makes clear which question has actually been answered.

The example in litres may also work over one part of the measuring range while the operation needs to review another. If the fleet normally refuels in conditions that differ from the test, describe those conditions to the installer when you agree what needs checking. A comparison made on level ground at the workshop provides evidence for that situation. Ask the supplier to explain how they verify the reading for the intended use and which factors need review if the data differs from the agreed reference.

A handover test should leave enough information to repeat the comparison if a discrepancy appears. A final number alone might lead the next person to check another tank, use a different parking position or refer to a volume from the wrong receipt. Preserve the test receipt and the identification of the observations. That way a later review can establish what stayed the same and what change the technician needs to assess.

It helps to put an explicit start date on the new reference in the operating record. If an expense report spans the workshop visit, the team can show which observations belong to each setup and which were unavailable. Accounts can keep the full purchase record while limiting the sensor reconciliation to periods with comparable measurements. That preserves evidence of the purchases without assigning a precision to the historical level readings that the installation was never checked to provide.

If the account retains an earlier value, mark it as evidence about the previous installation. That label helps a reviewer find the end of the old series and the beginning of the new one.

Reviewing a level or its change depends on a compatible sensor, verified calibration for that installation and available reports from the device. The Plaspy map documentation describes where the value can appear when the tracker provides it. Ruptela's Eco5 Lite product page lists the model's interfaces. If connectivity or data service is interrupted, take that limitation into account when deciding what you can establish.

If you are replacing a tank or evaluating a sensor for a truck, ask Plaspy about a compatible sensor and a test of the reading . Explain which tank you need to observe, what measurement unit your process uses and what record you can use to verify a fill. That lets the installer define a test that answers the operational question before the fleet needs to rely on the reading.

Home

Ready to get started with Plaspy?

Buy your GPS tracker or subscribe to our satellite tracking platform.
We'll help you choose the best option!
Call us or message us on WhatsApp: +57 (601) 580-3299


Reefer trailer temperature after a tractor swap: verify the reading

Match the sensor, compartment and time in Plaspy after a tractor swap. See which Ruptela Eco5 Lite readings you can attribute to each leg of the trip.

Remote immobilization with Eco5 Lite: what to verify at fleet handover

Agree on a supervised test, the Plaspy command record and the return to service before accepting remote immobilization for an Eco5 Lite fleet truck.

How to check when a truck left the yard after ignition

Separate ignition, movement inside the yard and the truck’s departure. Give dispatch a time it can confirm before updating the receiver.

How long did a truck stop when its GPS reports have gaps?

Separate observed timestamps from the start and end of a truck stop. Use the Plaspy timeline to work out what the available reports can establish.

Truck movement alerts: how to confirm an authorized yard move

Match the unit, yard instruction and Plaspy event to verify an authorized truck move with a Ruptela Eco5 Lite and confirm where the vehicle ended up.

How to check whether a truck used a detour in GPS history

Look at the reports before, within and after a detour to see what Plaspy can establish about the route and where another trip record may help.

How to hand over a shift while a truck is still on the road

Build a dispatch handover around the truck’s last reported location, its timestamp and the action the next shift needs to take before updating a customer.

Boxtrack 4G: Understanding Its Installation Demonstration

Understand the Boxtrack 4G demonstration: its tester, relay and different panic inputs. Prepare a clear discussion about your installation and its checks.

Billing GPS Customers Across Different Platforms

Bring together billing for Plaspy devices, external trackers and phone lines. Understand each item and which actions remain with other providers.

GPS Payments: What to Expect from a Reminder

Start organizing GPS customer reminders with clear expectations. Distinguish sending notices, receiving payments and improving payment timeliness.